$ 140,00
Product No.: 21
Print product data sheet 
Ask a question 
VAG-RUS Hex-CAN +DMA Interface - diagnostics in Russian.
Complete with the Adapter are delivered the program of 7 versions completely in Russian (we sell not a clone, and the original program).
The program does not require additional reception of a code of registration and attachment to the concrete computer.
Adapter VAG RUS+DMA possibilities same as well as HEX-USB-CAN VAG-COM + still button DMA - allows to learn pin codes immo.
The program is intended for simplification of job of Russian-speaking diagnosticians.
The basic attention has been given transfer of codes of errors.
And possibility to read on the native language that the car wants and not to run, each time, behind the dictionary, agree are it is important.
The program works through the special adapter - VAG-RUS which is connected to the computer through USB port.
The adapter supports K-line, L-line and CAN interfaces.
Full compatibility of the adapter vagcom usb+can+hex with all models VW, Audi, Seat and Skoda up to 2008 except platforms 8K, 8T and fresher. For them here...
It is possible to diagnose simply on OBD - FOLLOWING CARS:
* Daimler Chrysler: SLK 230 Bj. 02, E500 Bj. 01, M 270 CDI Bj. 04, Vaneo Bj. 03, Vito Bj. 02, Viano Bj. 04
* BMW: 7er Bj. 03, 330 d Bj. 04
* Porsche: 911 (996) / GT3
* Renault: Laguna dCi Bj. 02, Twingo Bj. 02
* Volvo: S / V after 2000
* Mazda: 6 Bj. 01
* Fiat: Multipla Bj. 04, Punto Bj. 02
Getting adapter VAG-RUS you also have an opportunity to diagnose ALL cars as well as in VAG-COM c adapter HEX-CAN USB supporting report OBD-II (ISO 9141-2, ISO 14230 and ISO-15765 "CAN" reports), such as BMW/Volvo and тд.!
In this mode program VAG-RUS allows to read/erase and decipher errors on the motor and transmission, to check up current parametres of gauges, by means of function DMA you can read/write data in RAM, ROM, EEPROM electronic blocks, but only in those blocks where there is this function or it is not blocked etc.
The program does not support reports SAE J1850-VPW and J1850-PWM were used in US-GM and Ford!
This Product was added to our catalogue on Friday, 05 June 2009.
