[<<First]  [<Back]  [Next>]  [last>>] 

Products in this categorie: 10

VCDS (VAG-COM) HEX-USB+CAN Interface

Version 812.4.

The list of supported cars:

•     * Audi - all models till 2009.
•     * Bentley Continental GT (3W) 2003 +
•     * Ford Galaxy (7M) 1996 +
•     * Seat - all models till 2009.
•     * Skoda - all models till 2009.
•     * Volkswagen - all models till 2009.
•     * Porsche Cayenne - to 05.2006

 812.4 switches on following new features and improvements:

12626 codes of errors

Measurement of Values for UDS/ODX/ASAM Operating modules.

These operating modules do not support traditionally VW/Audi "Blocks" or "Groups" live data. Instead measurement of values should be selected from the list through Advance Measuring Values. To 12 values can be selected and considered, represented in the form of the schedule, or are written down at the same time:



This functionality demands the operating module certain "file" of the dictionary of data that new modules are presented, it becomes more important than ever to be convinced, that you use last version (including last Version of Data).

Support to new UDS addresses.  
We believe, that VCDS now supports addresses for all operating modules UDS.

Support TP1.6 CAN of the Report.
Demanded by system ABS used in 6J chassis Ibiza. 

The screen of a choice of the Operating module shows now the "Installed" modules instead of the "General" modules.
On CAN based cars which support sluice CAN which supports the Install List of modules, VCDS now shows precisely, what modules are installed on the screen of a choice of the module of management:


Really 1.5 seconds are required approximately to receive the list of modules from Sluice CAN, so - that like a delay when you press [Select] normally/expects. When it is used on the car which does not have Sluice which supports the Install List, to the tab "Common" in the previous style it is still shown. For clients who use VCDS first of all on the senior cars which have no Install List in stock, this feature can be blocked on tab User Interface and Identification the screen of Options.

Data recording support simultaneously from both ECU on cars, using Double ECU.
For example B7 RS4 and R8 and various engines W12:



New Version 1.79 of an insertion
Demanded for compatibility with 6J chassis Ibiza and also accelerates reception of the Install List in Autoviewing and for tab Installed of the screen of a choice of the module of management, interface loading in an intellectual mode. However, it means, that interfaces are not loaded any more in a "mute" mode and are not compatible any more to 3 applications, thus "Initial loading in the Intellectual Mode" feature can be blocked on the screen of Options in those cases where compatibility with 3 applications is required.

 Support the Mode of Transport in a number of new models
Such as R8, new Ibiza, facelift Touareg, facelift A6.

The improved Support of Coding of the Subordinated Modules
The correct information of coding is given now Long Coding Helper and master module's Workshop ID the main module is used, when coding sends to the subordinated module when the subordinated module still does not have login Workshop ID.

The button of dump SRI moved to the main screen.
It has replaced a position with the Selector of the Operating module because Dump SRI is used much more often. Besides, function Reset SRI has been optimised in a manner to which we believe, have eliminated compatibility problems, earlier on certain computers. Buttons [Save] and [Clear] on the screen of the Selector of Operating modules are functional now.

Display of run EDC, works now with many ECU EDC16.
 
Support of coding new Airbag

Support new South African 1400 ECU CityGolf.

Support of Non-uniform Codes of Errors
 SAE/ISO "B" and "C" has coded VW, sometimes uses non-standard Subtypes which are properly supported now in VCDS with the new file CODES.DAT containing more than 12 600 texts.

The optimised position of the File a broad gull of the Session and the Expanded Value of Measurement chooses dialogues Based on the size of a window selected by the user and full size of screen PC.

Dialogue of the Name of a file of the File log allows to look through and open now an existing file If WINES is accessible, existing files are filtered for what contain VIN.

Improvements of core OBD-2:

• the Turbo the Mode also does not wait for 2nd Controller at increase in usual speed.
• Compatibility with models BMW with newer Automatic Transfers.
• Buttons [Copy] and [Save], now functional in the Mode 1.
• the Installer Changed to work with Windows 7.

Following functions are supported:

• the Login of the Operating module (Control Module ID) (including the Expanded login (Advanced ID)), Coding, Safety Access, and malfunction Codes
• New abilities of the File of registration of the Session (Log).
• Support universal OBD-II Mode 10.
• Support транспортныx means with double ECU, or example RS4 and engine W12.
• Both ECUs are accessible simultaneously through 31 address to Key parametres of adjustment, such as TBA.
• The reconsidered screen of Adaptation to support much longer Long Adaptation (Long Adaptations), now appearing in some operating modules.

It is possible to diagnose simply on OBD - FOLLOWING CARS:

• - Daimler Chrysler: SLK 230 Bj. 02, E500 Bj. 01, M 270 CDI Bj. 04, Vaneo Bj. 03, Vito Bj. 02, Viano Bj. 04
• - BMW: 7er Bj. 03, 330 d Bj. 04
• - Porsche: 911 (996) / GT3
• - Renault: Laguna dCi Bj. 02, Twingo Bj. 02
• - Volvo: S / V after 2000
• - Mazda: 6 Bj. 01
•  - Fiat: Multipla Bj. 04, Punto Bj. 02

This Product was added to our catalogue on Tuesday, 01 September 2009.

You can add first review.